[English] [LEGACY] Windows VPN Setup

[paxe]

If you struggle with the setup, feel free to use  a support channel in our Discord!

We recommend not to use this connection method unless there is no other working option. 

---

REQUIREMENTS

• Game device (pc)
• Radar device (second pc)
   

---

ON RADAR-PC

1.1. Download DefenderControl and disable Windows Defender with it.

1.2. Open CMD and type "ipconfig"

• Take note of your IPv4 address
• Take note of your default gateway.

1.3. Win + R and run “ncpa.cpl” 

1.5. Right click your primary internet adapter and open Properties.

1.6. Select "Internet Protocol Version 4 (TCP/IPv4)" and open Properties

1.7. Use “Obtain an IP address automatically” and “Obtain DNS server address automatically”

• Click “OK”
• Make sure "Internet Protocol Version 6 (TCP/IPv6)" is not ticked.
• Click OK then Close.

1.8. Go back to the "Network Connections Window" and press ALT once. 

• Click File -> Then click "New Incoming Connection".
• Add someone (bottom left).
• Enter username and password.
• Click OK. 
• Then click Next.
• Tick “Through the Internet”.
• Then click Next.

• Select "Internet Protocol Version 4" (Already selected by default, make sure it is ticked
• Then select properties

• Make sure “Network Access” is ticked.
• Under “IP address assignment” tick “Specifiy IP Addresses”
• Use your Default Gateway from earlier, to create a proper IP-Address range for “Specify IP addresses”
  For example: if gateway is 192.168.0.1 – use 192.168.0.50 to 192.168.0.55 for the ip range. – Then select “OK”
  Or use: 192.168.0.150 to 192.168.0.155, or try 192.168.0.170 to 192.168.0.175
• First three sectors (x.x.x.x format) must match gateway.

• Select OK then Allow Access

 

---

ON GAMING-PC

2.1. Press Windows + X

• Select "Network Connections"

2.2. Go to “VPN” on left side

2.3. Click “Add a VPN Connection” on the top

• VPN Provider: Windows (built-in)
• Connection name: Whatever you want to use
• Server name or address: Insert the IPv4 address from ipconfig of the Radar-PC
• VPN type: PPTP
• User name: User you made on incoming connections on Radar-PC 
• Password: Password you made on incoming connections on Radar-PC 

• Click Save.

2.4. Click the Connection Icon on the right side of your Taskbar and connect to your vpn.

 

---

You are done with the Windows-VPN setup.

 

If you have any questions or get stuck somewhere in the guide feel free to open a ticket or ask in a support channel on the Discord!

 

If you have any ideas or improvements for the guide feel free to message PaXe#1111 on Discord or leave a comment under this guide

 

It's always nice to see some feedback
so don't be shy and let us know what you think!