Search the Community

If you struggle with the setup, feel free to use the a support channel in our Discord! Requirements: Game device (pc) Radar device (second pc) ON RADAR-PC 1. Download Screamer.zip from the pinned messages in the dma-support channel and run DefenderControl. 2. Disable windows defender on Radar-PC. 3. Uninstall additional anti virus on Radar-PC. 4. Install Npcap on the Radar-PC.-> Make sure “Install Npcap in WinPcap API-compatible Mode” is checked, then install. 5. Download SoftEther VPN Server here: Click 6. Install the program by just clicking next and yes until it is installed. 7. Double click localhost, enter a password. ("test" for example) 8. Tick the first setting “Remote Access VPN Server” -> click next 9. Click yes, then enter "VPN" as virtual hub name. 10. Then tick the first option again “Enable L2TP Server Function (L2TP over IPsec) -> click OK 11. Disable VPN Azure at the bottom -> click OK 12. Click “Create Users” enter a short username and a password -- you can just use eft as username and password. click OK. 13. Click Exit in the “Manage Users” window, then click Close. -> If one of the ports shows "Error" instead of listening you will have to use one of the other ports later on. 14. Double click on the connection you created. 13. Then you click “Virtual NAT and Virtual DHCP Server (SecureNAT) at the bottom right Click Enable SecureNat Click OK Then click Exit Click Exit again ON GAMING-PC 1. Download SoftEther VPN Client here: Click 2. Run it and choose SoftEther VPN Client and click Next. 3. Tick "I agree to the end user License Agreement" box and click Next. 4. Click Next. 5. Choose the directory to install the software and click Next (you can leave it on default as well). 6. Click Next -> The Installation process will start. 7. Once the installation process is finished click Finish. 8. In the main screen click Add VPN connection. A message box will appear asking if you want to create a Virtual Network Adapter Click Yes. Click Add VPN connection again if you don't get the window from the picture below. 9. Fill everything out Host Name: you need enter the ip from your Radar-PC. It has to look similar to your Gaming-PC ip. To check the ipv4 address of the Radar-PC open CMD on Radar-PC and type ipconfig. Port Number: Usually you can leave it at 443. If it showed "Error" at step 13 of the Radar-PC setup part use one of the other ports. Username: What you set on Radar-PC before Password: What you set on Radar-PC before Now you are ready to go! Open SoftEther VPN on your Gaming PC and connect to the VPN you just created. Once you are connected, you can start the Launcher and enjoy the game! Usually no restarts are needed! You are done with the Softether-VPN setup. If you have any questions or get stuck somewhere in the guide feel free to open a ticket or ask in a support channel on the Discord! If you have any ideas or improvements for the guide feel free to message PaXe#1111 on Discord or leave a comment under this guide It's always nice to see some feedback so don't be shy and let us know what you think!

If you struggle with the setup, feel free to use a support channel in our Discord! REQUIREMENTS Game device (pc) Radar device (second pc) ON RADAR-PC 1. Download Screamer.zip from the pinned messages in the dma-support channel and run DefenderControl. 2. Disable windows defender on Radar-PC. 3. Uninstall additional anti virus on Radar-PC. 4. Install Npcap on the Radar-PC.-> Make sure “Install Npcap in WinPcap API-compatible Mode” is checked, then install. 5. Open CMD and type "ipconfig" Take note of your IPv4 address Take note of your default gateway. 6. Search and run “ncpa.cpl” This should open network connections. 7. Right click your primary internet adapter, then click properties. 8. Select “Internet Protocol Version 4 (TCP/IPv4)” and click properties 9. Use “Obtain an IP address automatically” and “Obtain DNS server address automatically” Click “OK” Un-check “Internet Protocol Version 6 (TCP/IPv6)" Click OK then Apply. – The PC may need up to 10 minutes for settings to refresh. 10. Press ALT – File will now appear on the top left. (Network connections page) Click File -> Then click “New Incoming Connection”. Add someone (bottom left). Enter username and password. Click OK. Then click Next. Tick “Through the Internet”. Then click Next. Select "Internet Protocol Version 4" (Already selected by default, make sure it is ticked Then select properties Make sure “Network Access” is ticked. Under “IP address assignment” tick “Specifiy IP Addresses” Use your Default Gateway from earlier, to create a proper IP-Address range for “Specify IP addresses” For example: if gateway is 192.168.0.1 – use 192.168.0.50 to 192.168.0.55 for the ip range. – Then select “OK” Or use: 192.168.0.150 to 192.168.0.155, or try 192.168.0.170 to 192.168.0.175 First three sectors (x.x.x.x format) must match gateway. Select OK then Allow Access ON GAMING-PC 1. Search and run “ncpa.cpl” 2. Right click your primary internet adapter and click properties. Select "Internet Protocol Version 4 (TCP/IPv4)". Use “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click "OK". Untick “Internet Protocol Version 6 (TCP/IPv6). Click OK. The PC may need up to 10 minutes for settings to refresh. Now close out the "Network Connections" window. 3. Press Windows + X Select "Network Connections" 4. Go to “VPN” on left side 5. Click “Add a VPN Connection” on the top VPN Provider: Windows (built-in) Connection name: Whatever you want to use Server name or address: Insert the IPv4 address from ipconfig of the Radar-PC VPN type: PPTP User name: User you made on incoming connections on Radar-PC Password: Password you made on incoming connections on Radar-PC Click Save. Connect to the VPN that you created. (You may need to reset radar pc) If VPN connects, great! If not, try restarting both computers. You are done with the Windows-VPN setup. If you have any questions or get stuck somewhere in the guide feel free to open a ticket or ask in a support channel on the Discord! If you have any ideas or improvements for the guide feel free to message PaXe#1111 on Discord or leave a comment under this guide It's always nice to see some feedback so don't be shy and let us know what you think!

If you struggle with the setup, feel free to use a support channel in our Discord! This guide is mainly for the recommended switch TL-SG105E -- the setup is usually similar with other switches/routers. Requirements Game device (pc) Radar device (second pc) Hardware Switch that supports Port Mirroring (For example: TP-Link Network Switch) 3 Ethernet Cables (1 to the router -- 1 to the Gaming-PC -- 1 to the Radar-PC) SETUP 1. Download Screamer.zip from the pinned messages in the dma-support channel and run DefenderControl. 2. Disable windows defender on Radar-PC. 3. Uninstall additional anti virus on Radar-PC. 4. Press windows key + r and type wf.msc -> Disable all three firewalls on Radar-PC. 5. Click Domain Profile, Private Profile & Public Profile and switch firewall to OFF. 6. Install Npcap on the Radar-PC. -> Make sure “Install Npcap in WinPcap API-compatible Mode” is checked, then install. 7. Download Easy Smart Configuration Utility and install it. 8. Plug the cable to your router into switchport 1 -- Gaming-PC into switchport 2 -- Radar-PC into switchport 3. 9. Open Easy Smart Configuration Utility. If everything is plugged in correctly you will see this: 10. Click on Login and enter your login information. -> Default usually is admin / admin 11. Change everything like shown below 12. Restart Radar-PC and check if both pcs have internet. If so, start the C_Solution launcher on Radar-PC -> login -> start Escape from Tarkov on Gaming-PC and join a game. You are done with the Port-Mirror setup. If you have any questions or get stuck somewhere in the guide feel free to open a ticket or ask in a support channel on Discord! If you have any ideas or improvements for the guide feel free to message PaXe#1111 on Discord or leave a comment under this guide It's always nice to see some feedback so don't be shy and let us know what you think!

If you struggle with the setup, feel free to use the short-support channel in our Discord! REQUIREMENTS Game device (pc) Radar device (second pc) 2nd network card or Ethernet&Wifi on radar device 1 extra ethernet cable. GUIDE Everything in this guide is done on Radar-PC 1. Connect the Game-PC and Radar-PC with an ethernet cable. 2. Download npcap from the pinned messages of the dma-support channel and install it (don't change any install settings). 3. Press Windows + X Select "Network Connections" 4. Go to "Status" Click on "Change adapter options" 5. Check what the network adapters you want to use are called I write down "Ethernet 7" since that is the ethernet Interface that my Gaming-PC is connected to. I go to properties of the "Wi-Fi" interface since that is the interface my Radar-PC is connected to the internet with. 6. Switch to the "Sharing" tab Tick "Allow other network users to connect through this computer's Internet connection". Select the interface you wrote down before. Untick "Allow other network users to control or disable the shared Internet connection" If you have any questions or get stuck somewhere in the guide feel free to open a ticket or ask in the "dma-support" channel! If you have any ideas or improvements for the guide feel free to message PaXe#1111 on Discord or leave a comment under this guide It's always nice to see some feedback so don't be shy and let me know what you think!