Jump to content
24/7 Support - Discord: https://discord.gg/7nAZKY6SKJ

PaXe

Moderators
  • Posts

    59
  • Joined

  • Last visited

  • Days Won

    36

Everything posted by PaXe

  1. Hello 🙂 Here are the commands: Auto Update: sc config wuauserv start= auto net start wuauserv Firewall: netsh advfirewall set allprofiles state on Fast Startup: REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power" /V HiberbootEnabled /T REG_dWORD /D 1 /F
  2. I can confirm this. Also, Q4 is still planned. However with the chip shortage still going strong we can not really promise that we will 100% still get them in 2021. Unfortunately it is very unpredictable at the moment.
  3. All good 🙂 If you need anything else don't hesitate to open a ticket in the discrod for fastest support or simply reply here.
  4. You need to click the bacon 😄 After that you can see the presale-general channel and check the pins
  5. Hello 🙂 You should always pick a vps that is close to you so that a good ping is ensured -- it needs to be a windows VPS with at least 2 cores and 4gb ram. You can find a recommended list in the pinned messages of the presale channel in our discord, The Radar and ESP will both be displayed in a separate window and NOT in-game. 21H1 should work just fine.
  6. Hello 🙂 For obvious reasons we can't really talk about how our solutions work in public but we have our ways to get to the data we need :). We recommend a 2 PC setup for best performance but both work fine. You won't need a fresh install of windows, but both PCs need to be Windows 10 1909 or newer - You can check that by running the winver command. Once you purchase your subscriptions you will get access to detailed step by step guides that guide you through the setup and we also have a nice support team on discord that is almost 24/7 available to help you out in case you get stuck somewhere.
  7. Hello stg, You can find the RouterVM as a direct download at the top of the Guide Page. Unzip the file you get with that download and then open it from the VMWare Player.
  8. Feel free to open a ticket in our discord if you require assistance with this setup! We kindly ask that you at least try to follow the Text Guide before opening a ticket! For your own safety we advise you to carefully read ALL the red text on this page : ) Requirements You will need everything that is listed below to make this work with our Solutions! Hardware Game device (Your main Gaming PC) Needs to be Windows 10 1909 or later. Radar device (Second PC/Laptop ) Needs to be at least 2Cores and 4GB RAM. Second PC needs to be Windows 10 1909 or later. Software ClutchRouterVM (Second PC) Direct Download Text Guide Make sure that BOTH PCs are connected directly to your Router and have a working Internet connection before following this guide! ON RADAR PC 1.0. Opent the C_Launcher and tick DC Link in the device manager. 1.1. Unzip the ClutchRouterVM.zip 1.2. Install the VMware-player. Just click next until the setup is completed. 1.3. Open VMware Workstation 16 Player 1.4. Click Open a Virtual Machine. 1.5. Select the ClutchRouterVM.ovf 1.6. Choose a name and sotage path. Defaults should be fine here. Hit Import 1.7. Power on the ClutchRouterVM inside the VMware Workstation 16 Player. 1.8. Let the Virtual Machine boot and it will restart once. Wait for it to reboot and don't do anything! 1.9. After it's back on login with the user "clutch" 1.10 Type ipx to see the ip of the Virtual Machine. ON Gaming-PC 2.1. Open ncpa.cpl, doubleclick your main internet adapter, click Properties and double click "Internet Protocol Version 4 (TCP/IPv4)" 2.2. Set a static IP-Address -> you can take the same values as displayed by ipconfig. 2.3. Go into advanced. Click "Add" under "default gateways" Next to Gateway type your Router's IP address, untick "Automatic metric" and enter 100 and click "Add". -> If you don't know it you can type ipconfig in cmd on the Radar-PC and look for "Default Gateway". Click "Add" under "default gateways" Next to Gateway type your VM's IP address, untick "Automatic metric" and enter 50 and click "Add". Click "OK" Click "OK" 2.4. Untick "Internet Protocol Version 6 (TCP/IPv6)" 2.5. You should be ready to go! Troubleshooting / Testing Functionality N / A Troubleshooting N / A If these troubleshooting steps don't fix your connection issue we can help you in a ticket on our discord server! Feel free to open a ticket in our discord if you require assistance with this setup! We kindly ask that you at least try to follow the Text Guide before opening a ticket! If you have any ideas or improvements for this guide feel free to message PaXe#1111 on Discord. It's always nice to see some feedback so don't be shy and let us know what you think!
  9. Already unbanned by @Kenion. @Mangowill investigate why it happened in the first place. Sorry for the inconvenience!
  10. If you struggle with the setup, feel free to use the secret-membership channel in our Discord! For your own security we advice you to carefully read ALL the red text on this page : ) Installing Windows 0.0. Select your preferences and click Next. 0.1. Click Install now. 0.2. Click "I don't have a product key" 0.3. Select your preferred Windows verison (We recommend Windows 10 Pro or Pro N) and click Next. 0.4. Tick "I accept the license terms" and click Next. 0.5. Click "Custom: Insall Windows only (advanced)" 0.6. Select the drive you want to install Windows on and click Next. 0.7. Wait for the installation to finish. 0.8. From now on every setting is up to your preference. If you have any questions or get stuck somewhere in the guide feel free to open a ticket or ask in the "secret-membership" channel! If you have any ideas or improvements for the guide feel free to message PaXe#1111 on Discord or leave a comment under this guide It's always nice to see some feedback so don't be shy and let me know what you think!
  11. If you struggle with the setup, feel free to use the support channels in our Discord! For your own security we advice you to carefully read ALL the red text on this page : ) Windows Media Creation Tool 0.1. Download the Windows Media Creation Tool. https://www.microsoft.com/en-us/software-download/windows10 0.1. Open the MediaCreationTool*.exe 0.2. Accept the license terms 0.3. Select "Create isntallation media (SUB flash drive, DVD, or ISO file) for another PC Click Next 0.4. Select the options you need (All of our products only work with Windows 10 64-bit) Click Next 0.5. Select "ISO file" Click Next 0.6. Select a folder you want to save it to and click "Save" 0.7. Wait for the download to be completed. 0.8. Click Finish If you have any questions or get stuck somewhere in the guide feel free to open a ticket or ask in one of our support channels! If you have any ideas or improvements for the guide feel free to message PaXe#1111 on Discord or leave a comment under this guide It's always nice to see some feedback so don't be shy and let me know what you think!
  12. Feel free to open a ticket in our discord if you require assistance with this setup! We kindly ask that you at least try to follow either the Video Guide or the Text Guide before opening a ticket! For your own safety we advise you to carefully read ALL the red text on this page : ) Requirements You will need everything that is listed below to make this work with our Solutions! Hardware Game device (Your main Gaming PC) Needs to be Windows 10 1909 or later. Radar device (Second PC/Laptop or VPS) Needs to be at least 2Cores and 4GB RAM. Second PC needs to be Windows 10 1909 or later. VPS needs to be Windows Server 2019 1809 or later. Software Softether VPN Server (On Radar device) Direct Download Official Website Video Guide Scroll down if you prefer to follow a text guide! Video created by Mango. If you successfully finished this Video Guide you can proceed with the Radar Setup Guide. Text Guide If you already successfully finished the Video Guide then you are done with this guide and can continue with the Radar Setup. ON RADAR PC 1.1. Install the Softether VPN Server by just clicking next and next until it is installed. 1.2. Double click localhost, enter any password (we recommend that you write it down as you might need it in the future). 1.3. Tick the first setting “Remote Access VPN Server” -> click next 1.4. Click next, then yes, enter "VPN" as virtual hub name and click OK. 1.5. Exit out of the Dynamic DNS Function Window without changing any settings. 1.6. Tick the first option “Enable L2TP Server Function (L2TP over IPsec), you can also change the IPsec Pre-Shared Key here or leave it at default "vpn" -- you will need it later -> click OK. 1.7. Disable VPN Azure -> click OK 1.8. Click “Create Users” Enter a username and a password (They don't really need to be secure.. But it doesn't hurt to make them secure) Click OK. 1.9. Click Exit in the “Manage Users” window, then click Close. 1.10. Double click on the connection you created. 1.11. Then you click “Virtual NAT and Virtual DHCP Server (SecureNAT) at the bottom right Click Enable SecureNat Click OK Click Exit Click Exit ON GAMING PC 2.1. Press Win + X Select "Network Connections" 2.2. Go to “VPN” on left side. 2.3. Click “Add a VPN Connection” on the top. VPN Provider: Windows (built-in) Connection name: Whatever you want to use. Server name or address: Run ipconfig in cmd on the Radar-PC and look for the IPv4. VPN type: L2TP/IPsec with pre-shared key. Pre-shared key: Insert the Pre-shared key you entered earlier or use the default value "vpn". User name: User Name you created in Softether on Radar-PC. Password: User password you set in Softether on Radar-PC. Click Save. 2.4. Click the Connection Icon on the right side of your Taskbar and connect to the vpn you just created. 2.5. After successfully connecting your VPN make sure that you still have a working internet connection on both PCs. You are done with the Hyprid-VPN setup. If you successfully finished this Text Guide you can proceed with the Radar Setup Guide. Troubleshooting / Testing Functionality Testing Functionality Method 1: If your VPN has the status "Connected" and you have working internet on your Gaming-PC your VPN is working correctly. Method 2: On the Radar-PC open your "Softether VPNServer Manager" and double click your profile While you are connected your Virtual Hub will show two Sessions instead of one! Please try the troubleshooting steps if you can't connect to your VPN or you lose your internet connection when it says "Connected". Troubleshooting Connections Issues Open Ports UDP 500 AND UDP 4500 in the firewall of your Radar-PC. Make sure that Secure NAT is enabled. Make sure that you entered the correct ip address in you vpn connection profile. "the L2TP connection attempt failed because the security layer encountered a processing error" You can try these fixes. If these troubleshooting steps don't fix your connection issue we can help you in a ticket on our discord server! Feel free to open a ticket in our discord if you require assistance with this setup! We kindly ask that you at least try to follow either the Video Guide or the Text Guide before opening a ticket! If you have any ideas or improvements for this guide feel free to message PaXe#1111 on Discord. It's always nice to see some feedback so don't be shy and let us know what you think!
  13. Feel free to open a ticket in our discord if you require assistance with this setup! We kindly ask that you at least try to follow either the Video Guide or the Text Guide before opening a ticket! For your own safety we advise you to carefully read ALL the red text on this page : ) Requirements You will need everything that is listed below to make this work with our Solutions! Hardware Game device (Your main Gaming PC) Needs to be Windows 10 1909 or later. Radar device (Second PC/Laptop or VPS) Needs to be at least 2Cores and 4GB RAM. Second PC needs to be Windows 10 1909 or later. VPS needs to be Windows Server 2019 1809 or later. Software Softether VPN Server (On Radar device) Direct Download Official Website Softether VPN Client (On Gaming device) Direct Download Official Website Video Guide Scroll down if you prefer to follow a text guide! ON RADAR-PC ON GAMING-PC Videos created by Mango. If you successfully finished this Video Guide you can proceed with the Radar Setup Guide. Text Guide If you already successfully finished the Video Guide then you are done with this guide and can continue with the Radar Setup. ON RADAR-PC 1.1. Install the Softether VPN Server by just clicking next and next until it is installed. 1.2. Double click localhost, enter any password (you might need it in the future). 1.3. Tick the first setting “Remote Access VPN Server” -> click next 1.4. Click next, then yes, enter "VPN" as virtual hub name and click OK. 1.5. Exit out of the Dynamic DNS Function Window without changing any settings. 1.6. Tick the first option “Enable L2TP Server Function (L2TP over IPsec). 1.7. Disable VPN Azure at the bottom -> click OK 1.8. Click “Create Users” enter a username and a password (They don't really need to be secure.. But it doesn't hurt to make the secure) click OK. 1.9. Click Exit in the “Manage Users” window, then click Close. 1.10. Double click on the connection you created. 1.11. Then you click “Virtual NAT and Virtual DHCP Server (SecureNAT) at the bottom right Click Enable SecureNat Click OK Click Exit Click Exit ON GAMING-PC 2.1. Install the Softether VPN Client by just clicking next and next until it is installed. 2.2. Once the installation process is finished click Finish. 2.3. In the main screen click Add VPN connection. If you are doing this for the first time a message box will appear asking if you want to create a Virtual Network Adapter Click Yes. Leave the Default name "VPN" and click OK. Click Add VPN connection again if you don't get the window from the picture below. 2.4. Fill everything out Host Name: You need enter the IP of your Radar-PC. It has to look similar to your Gaming-PC IP. To check the IPv4 address of the Radar-PC open CMD on Radar-PC and type ipconfig. -> Make sure that "VPN" automatically shows up in "Virtual Hub Name" Port Number: Usually you can leave it at 443 but you can also use 992, 1194 and 5555. User Name: User Name you created in Softether on Radar-PC. Password: User password you set in Softether on Radar-PC. Click OK. 2.5. Now you can either right click and connect to your vpn or simply double click on the new connection and it should connect without any issues. You are done with the Softether-VPN setup. If you successfully finished this Text Guide you can proceed with the Radar Setup Guide. Troubleshooting / Testing Functionality Testing Functionality Method 1: If your VPN has the status "Connected" and you have working internet on your Gaming-PC your VPN is working correctly. Method 2: On the Radar-PC open your "Softether VPNServer Manager" and double click your profile While you are connected your Virtual Hub will show two Sessions instead of one! Please try the troubleshooting steps if you can't connect to your VPN or you lose your internet connection when it says "Connected". Troubleshooting Connections Issues Open Ports UDP 500 AND UDP 4500 in the firewall of your Radar-PC. Make sure that Secure NAT is enabled. Make sure that you entered the correct ip address in you vpn connection profile. Stability Issues All of the following settings should be done on the Softether-Client and can be very setup dependant! Try using port 5555 instead od 443. Go into advanced settings. Set the "Number of TCP Connections" to 32 Tick "Disable VoIP / QoS Functions" Untick "Encrypt VPN Session with SSL" Tick "Disable UDP Acceleration" If these troubleshooting steps don't fix your connection issue we can help you in a ticket on our discord server! Feel free to open a ticket in our discord if you require assistance with this setup! We kindly ask that you at least try to follow either the Video Guide or the Text Guide before opening a ticket! If you have any ideas or improvements for this guide feel free to message PaXe#1111 on Discord. It's always nice to see some feedback so don't be shy and let us know what you think!
  14. Feel free to open a ticket in our discord if you require assistance with this setup! We kindly ask that you at least try to follow the Text Guide before opening a ticket! For your own safety we advise you to carefully read ALL the red text on this page : ) Only follow this guide if you were instructed to do so by Clutch-Solution Staff or you can't get any other connection method to work! Requirements You will need everything that is listed below to make this work with our Solutions! Hardware Game device (Your main Gaming PC) Needs to be Windows 10 1909 or later. Radar device (Second PC/Laptop) Second PC needs to be Windows 10 1909 or later. This connection method will not work with VPS! Managed Network Switch Needs to support Port Mirroring. We recommend the TP-Link TL-SG105E. Text Guide ON ANY PC 1.1. Download Easy Smart Configuration Utility and install it. 1.2. Plug the cable to your router into switchport 1 -- Gaming-PC into switchport 2 -- Radar-PC into switchport 3. 1.3. Open Easy Smart Configuration Utility. If everything is plugged in correctly you will see this: 1.4. Click on Login and enter your login information. -> Default usually is admin / admin 1.5. Change everything like shown below 1.6. Reboot the Switch. 1.7. Start the C_Solution launcher on the Radar-PC -> login -> start Tarkov Radar -> Go to Device Manager in the UAV -> tick "winpk" -> tick "low latency" -> tick "port mirror". You are done with the Port Mirroring setup. If you successfully finished this Text Guide you can proceed with the Radar Setup Guide. Feel free to open a ticket in our discord if you require assistance with this setup! We kindly ask that you at least try to follow the Text Guide before opening a ticket! If you have any ideas or improvements for this guide feel free to message PaXe#1111 on Discord. It's always nice to see some feedback so don't be shy and let us know what you think!
  15. But why are you guys posting this here and not in testimonials ?
  16. Feel free to open a ticket in our discord if you require assistance with this setup! We kindly ask that you at least try to follow either the Video Guide or the Text Guide before opening a ticket! For your own safety we advise you to carefully read ALL the red text on this page : ) Only follow this guide if you were instructed to do so by Clutch-Solution Staff or you can't get any other connection method to work! Requirements You will need everything that is listed below to make this work with our Solutions! Hardware Game device (Your main Gaming PC) Needs to be Windows 10 1909 or later. Radar device (Second PC/Laptop) Second PC needs to be Windows 10 1909 or later. This connection method will not work with VPS! Video Guide Scroll down if you prefer to follow a text guide! Video created by Mango. If you successfully finished this Video Guide you can proceed with the Radar Setup Guide. Text Guide If you already successfully finished the Video Guide then you are done with this guide and can continue with the Radar Setup. ON RADAR-PC 1.1. Connect the Game-PC and Radar-PC with an ethernet cable. 1.2. Press Windows + X Select "Network Connections" 1.3. Go to "Status" Click on "Change adapter options" 1.4. Check what the network adapters you want to use are called I write down "Ethernet 7" since that is the ethernet Interface that my Gaming-PC is connected to. I go to properties of the "Wi-Fi" interface since that is the interface my Radar-PC is connected to the internet with. 1.5. Switch to the "Sharing" tab Tick "Allow other network users to connect through this computer's Internet connection". Select the interface you wrote down before. Untick "Allow other network users to control or disable the shared Internet connection" 1.6. Start the C_Solution launcher on the Radar-PC -> login -> start Tarkov Radar -> Go to Device Manager in the UAV -> tick "Legacy Mode". You are done with the ICS setup. If you successfully finished this Text Guide you can proceed with the Radar Setup Guide. Feel free to open a ticket in our discord if you require assistance with this setup! We kindly ask that you at least try to follow either the Video Guide or the Text Guide before opening a ticket! If you have any ideas or improvements for this guide feel free to message PaXe#1111 on Discord. It's always nice to see some feedback so don't be shy and let us know what you think!
×
×
  • Create New...

Important Information

Please read and accept our: Privacy Policy(DSGVO), Terms of Use and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.