Luks

Join from your alt on the presale discord server, and explain there with details what happened. More details you provide = better.

You can try two things: 1. Contact enigma first, and describe there your issue with details, just like you have done it here. 2. Create a ticket at clutch discord.

Just make sure you won't get multiple times reported, because then your trust factor might go down.

It is what it is That's a life on 4:3 Good luck in new season!

Hey, not a stupid question at all — we’ve all been there when starting out with DMA and Fuser setups. To answer you: yes, the resolution needs to be the same on both PCs — the one running your game and the second one doing the ESP overlay. If they don’t match, your ESP will be misaligned, stretched, or just not show correctly. So even if you prefer 4:3 stretched in-game, you’ll need to make sure that both your main PC (with the Fuser) and your radar/second PC are set to the same resolution and refresh rate. It’s the only way for Fuser to overlay the ESP properly on your screen. I know it’s a bit annoying to adjust, but once both outputs match, everything should line up perfectly and you won’t have to mess with it again. Everything sent to the Fuser must be identical—same resolution, refresh rate, scaling—so it can perfectly layer the ESP output onto your main monitor without distortion.

The best performing and trusted site to buy hardware setup is @Enigma-x1.com LeetDMA V1.2 Card LeetDMA V1.2 (incl. Emulated 1:1 Fw) LeetDMA Pro V2 Card LeetDMA Pro V2 (incl. Emulated 1:1 Fw) KMBox-Net KMBox B+Pro HDMI Fuser Enigma HDMI/DP Fuser If you need complete setup, get the bundle and you have it cheaper than buying solo each part. Enigma Maxi Bundle

Hey man, first thing: you gotta know what each part actually does—don’t just pile stuff in and hope for the best. Here's the beginner’s guide: What the gear actually does: 1. DMA card Reads game memory externally (ESP, radar)—you got raw data, but it won’t aim for you. 2. Fuser (optional) Merges the video from your “radar PC” onto your main monitor. Lets you see ESP overlay while you play. 3. KMBox B+ Pro / KMBox Net / MAKCU / Arduino These emulate a mouse or keyboard from the radar PC, so you can use aimbots or triggerbots. Without one, your aimbot won’t move your aim—it’s essential for auto‑aim functions. So what do you actually need? For ESP only → Just a DMA card (plus firmware). For aimbot or triggerbot → DMA card + a mouse emulator (KMBox / MAKCU / Arduino). Want everything on one monitor → Add a Fuser so ESP is overlaid directly. Decide if you want to have HDMI Fuser or DP. So answering you is the DMA card enough for aimbot? - Nope — DMA gives you memory access (ESP/radar). To actually move the aim for you, you need KMBox/MAKCU/Arduino as a mouse emulator. And if you want the ESP overlay on the same screen, you add Fuser. Everything builds on top of the DMA card. Start with the DMA card—then add a mouse emulator if you want aimbot, and a Fuser if you want it all on one screen. That way you know exactly what each piece does—and won’t waste money or get lost.

What subscription you bought? I saw long time ago somebody trying to do something with VPS, but eventually gave up because of delay and performance issues. For best performance, you should get yourself second PC, you don't need beast specs. Min spec: 4GB RAM / CPU: 2 Cores

The team is doing what they can to deliver secure solution to customers.

What you did to get it to work? Wrong config?

I know that if you purchase it here via official site, it's immediately activated.

There are also bunch of tutorials how to downgrade or do dual boot, so don't worry about it.

For the setup, tell him to look for left top corner and press "[Read me] Guide", then follow step by step.

Nobody can't guarantee you anything, but as long it won't directly interact with the game, I don't see any problem. It would be the best to purchase 3 days subscription to try it out, before subscribing to 3 months or even lifetime.

You might missing one of the steps, please submit a support ticket at Discord. They will help you solve that.

Seems like you didn't configure it properly. Talk to your dealer (reseller) and the he will be able to help you with it.

You are right, but can be used in different supported games like Apex.

Works just fine, just checked it. DM @Drac with your username.

What would you suggest to get? Obviously a DMA card, but KMBox + Fuser?

So far best experience for you? Would you recommend to anyone?

Firmware you can get here: DMA Cards, KMBox-Net, KMBox B+Pro, HDMI Fuser LeetDMA V1.2 Card LeetDMA V1.2 (incl. Emulated 1:1 Fw) LeetDMA Pro V2 Card LeetDMA Pro V2 (incl. Emulated 1:1 Fw) KMBox-Net KMBox B+Pro HDMI Fuser Enigma HDMI/DP Fuser Full Package for hardware cheating, everything you need: Enigma Maxi Bundle Q: Is the hardware required for my cheat? A: No, we offer cheats and hacks with and without DMA hardware. For more information, check the "requirements" tab please. Available in Stock at https://enigma-x1.com/

Yes, you will need DMA card to use it. Important for security reasons: A fuser is required to see the ESP on the Gaming-PC. Without a fuser the ESP is visible on the Second-PC only. (Parsec / Moonlight) 2 PC / Notebook (Min spec: 4GB RAM / CPU: 2 Cores & AVX2) DMA Card e.g. LeetDMA AND pcileech firmware with ACE support To fully experience the solution, you will need: -DMA -Fuser Highly suggest to grab DMA card from https://enigma-x1.com/ and Fuser as well.

Would love to see vid with Clutch ESP on.

In the left top corner, you have button [Read me] Guide. Please press it and follow step by step instruction how to set it up correctly. If you are still unable to get it to work, please join our discord and submit a support ticket.

Happy to hear that you like our Staff and our products.