EFT cannot hear anything when DMA connected to clutch

[HammerTime]

As soon as i connect clutch to my dma on eft i can’t hear anything my mic still works but my audio doesn’t 

[Drac]

STATIC AUDIO / LAGS WHILE DMA IS RUNNING

• Run the Loader.exe, perform a Speedtest, and play a song on YouTube or Spotify to check if the issue persists
• Try installing the DMA Card in a different PCI slot on the motherboard
• If you have an integrated graphics card, try installing the DMA Card in the slot of your graphics card would normally go and check if the issue is resolved
• Try switching all USB port connections on the Gaming-PC. Preferably use USB 3.x+
  • Try disconnecting all USB devices, leaving only the audio device connected check if the issue is resolved
  • If you are using jack connectors for your headphones, purchasing a USB sound card might resolve the issue
• Refer to your motherboard manual and try installing the DMA Card in a slot that uses the CPU lanes instead of the chipset lane
  • If this is not possible, check if you have any M.2 drives installed and try moving them to a CPU lane instead of the chipset lane
• If none of these solutions work, you likely need a motherboard with better lane distribution
  • This issue with static audio or lags occurs due to an overload on the chipset lane

[bb219]

i had this issue as well it was fixed by changing the port that my audio was connected to