[English] DTM - Connection Guide

[Mango]

Feel free to open a ticket in our discord if you require assistance with this setup!
We kindly ask that you at least try to follow the Text Guide before opening a ticket!

For your own safety we advise you to carefully read ALL the red text on this page  : )
 

---

Requirements
You will need everything that is listed below to make this work with our Solutions!

Hardware
Game device (Your main Gaming PC)
Needs to be Windows 10 1909 or later.

Radar device (Second PC/Laptop)
Needs to be at least 2Cores and 4GB RAM.
Second PC needs to be Windows 10 1909 or later.
This connection method will not work with VPS!

Software
EasyDTMSetup (On Gaming-PC)
EasyDTMSetup.zip

 

---

Text Guide
If switching from VPN method to this you should uninstall the old VPN stuff.

ON RADAR-PC

1.1. Right click the Windows icon in your taskbar and select "Windows Powershell (Admin)"

 

1.2. Enter Set-ItemProperty -path "HKLM:\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters"  -Name "IPEnableRouter" -value 1

1.3. Enter sc.exe config remoteaccess start= auto

1.4. Enter sc.exe start remoteaccess

1.6. Type ipconfig and write down the IPv4 Address from your main adapter.

 

---

ON GAMING-PC

2.1. Download the EasyDTMSetup.zip attached to this post and extract it.

2.2. Disable IPv6.

• Press Win + R -> type "ncpa.cpl" and hit OK.
• Right click the adapter which the Radar-PC uses to connect to the internet and open "Properties".
• Untick "Internet Protocol Version 6 (TCP/IPv6)".
  

2.3. Open the extracted EasyDTMSetup folder.

2.4. Run SetupNetAdapter.exe as administrator.

2.5. Select your active network device.

2.7. Leave blank and hit enter for default IP.

2.8. Type the Radar-PCs IPv4 address in the console - then hit enter.

2.9. Hit enter on the next prompt, do not input anything.

2.10. Hit enter on the next prompt, do not input anything.

2.11. Hit enter to confirm the changes.

 

After doing these steps the Radar-PC MUST be on for your Gaming-PC to have internet. If you want internet on Gaming-PC without the Radar-PC do the following steps on your Gaming-PC:

• Press Win + R -> type "ncpa.cpl" and hit OK.
• Right click the adapter which the Gaming-PC uses to connect to the internet and open "Properties".
• Navigate to "Internet Protocol Version 4 (TCP/IPv4)" and double click it.
• Enter the IP address of the default gateway that get's displayed in either ipconfig or the EasyDTMSetup.

 

 

You are done with the DTM Connection setup.

If you succesfully finished this Text Guide you can proceed with the Radar Setup Guide.

 Guide created by Mango.

 

---

Troubleshooting / Testing Functionality

Testing Functionality

• If you shut down your Radar-PC or disconnect it from the internet theGaming-PC should lose it's internet connection.
  • This means your DTM is working correctly

 

Troubleshooting

• No internet?
  • Make sure you wait at max 5 minutes for it to return. If your internet did not return, please use the SOSGuide.pdf supplied.
• Have internet but no data is transferred? On Radar PC run sc.exe start remoteaccess in admin Powershell again
• Invalid Source Parameter (2) error
  • Disable IPv6. Redo step 2.2.
  • The configuration might have been successful -> Check the adapter configuration to confirm it isn't set to
    "obtain an IP address automatically".
• To undo: rerun the program, select your adapter, and enter "r"

If these troubleshooting steps don't fix your connection issue we can help you in
a ticket on our discord server!

 

---

 

Feel free to open a ticket in our discord if you require assistance with this setup!
We kindly ask that you at least try to follow the Text Guide before opening a ticket!

 

It's always nice to see some feedback
so don't be shy and let us know what you think!