PaXe Posted September 5, 2020 Share Posted September 5, 2020 Feel free to open a ticket in our discord if you require assistance with this setup! We kindly ask that you at least try to follow the Text Guide before opening a ticket! For your own safety we advise you to carefully read ALL the red text on this page : ) Only follow this guide if you were instructed to do so by Clutch-Solution Staff or you can't get any other connection method to work! Requirements You will need everything that is listed below to make this work with our Solutions! Hardware Game device (Your main Gaming PC) Needs to be Windows 10 1909 or later. Radar device (Second PC/Laptop) Second PC needs to be Windows 10 1909 or later. This connection method will not work with VPS! Managed Network Switch Needs to support Port Mirroring. We recommend the TP-Link TL-SG105E. Text Guide ON ANY PC 1.1. Download Easy Smart Configuration Utility and install it. 1.2. Plug the cable to your router into switchport 1 -- Gaming-PC into switchport 2 -- Radar-PC into switchport 3. 1.3. Open Easy Smart Configuration Utility. If everything is plugged in correctly you will see this: 1.4. Click on Login and enter your login information. -> Default usually is admin / admin 1.5. Change everything like shown below 1.6. Reboot the Switch. 1.7. Start the C_Solution launcher on the Radar-PC -> login -> start Tarkov Radar -> Go to Device Manager in the UAV -> tick "winpk" -> tick "low latency" -> tick "port mirror". You are done with the Port Mirroring setup. If you successfully finished this Text Guide you can proceed with the Radar Setup Guide. Feel free to open a ticket in our discord if you require assistance with this setup! We kindly ask that you at least try to follow the Text Guide before opening a ticket! If you have any ideas or improvements for this guide feel free to message PaXe#1111 on Discord. It's always nice to see some feedback so don't be shy and let us know what you think! Link to comment
Recommended Posts